Resonance R16M Mode D'emploi page 112

Bluetooth
Press the BLUETOOTH icon (see adjacent image) to activate database data transmission
to PC, if set to OFF transmission is disabled.
Autosave
Press the AUTOSAVE icon (see adjacent image) to enable the autosave mode. If enabled,
once selected a patient, every performed test will be automatically stored into the data-
base after pressing the EXIT icon; if disabled a pop up window will be displayed asking for
confirmation.
Language
Through the LANGUAGE button (see adjacent image) you can select the interface
language. By pressing this icon a menu with all the available languages will be opened.
Rotation block
Some of the tests provide for their visualization either horizontally or vertically: the
visualization is automatically set by rotating the instrument. This option allows to block
the rota-tion keeping the display horizontal.
Wi-Fi
By pressing the WIFI icon (see adjacent image) a window allowing the connection to a Wi-
Fi network will. This icon is active only when a Wi-Fi USB dongle is inserted in the USB host
port. This option can be used to check the connection with the wireless printer.
Power management
In order to improve the battery operating autonomy, you can set 3 different power
modes: energy saving, balanced mode and performing mode. Based on the selected
mode the display backlight and the unit automatic switching off will change. When the
unit is connected to the power supply and the performing mode is selected, the display
remains constantly backlit.
PIN code change
By pressing this icon, you can change the PIN code by typing in any 4-digit numeric code
or disable the PIN code request at power on. Please note that in order to change or disable
the PIN you need to type in the one currently in use first.
Patient data mandatory fields
Pressing this key gives access to a menu where it is possible to define the minimum fields
necessary for the creation of a new patient. It is possible to set only a numeric code or
activate the fields like name, surname, etc.
Print-out
By pressing the PRINT icon (see adjacent image) you can set the print options for the
optional portable printer.
You can select the printing-out of the following fields:
Unit serial number and logo

Patient's data

Calibration expiry date

Lines for comments after the heading

Lines for comments after every test

R16M User's Manual – Page 112