Energy Saving; Light Indicators - Carrier Type A Manuel D'installation

Type A Electronic Control
Control
position.

Energy saving

button repeatedly it is possible to raise temperature by 4°C in
cooling mode and reduce it by 4°C in heating mode.
Seasonal changeover
Manual
on the control.
Centralised
Centralised seasonal changeover can be done in two ways:
- by a switch located on the central control panel that allows
entering water pipe.
sensor.
adequately insulated.
changeover.
The control has an input that can be used as window contact or
presence detection.
or to Energy Saving
raised by 4°C in cooling mode and reduced by 4°C in heating mode.
seconds.
"Night" and "Darkening" mode
Button operation:
POWER
MODE
FAN
Temperature selector
Its purpose is to maintain the temperature at the desired level. The

Light indicators

Blue LED
ON
Flashing
ON
OFF
Flashing
ON
ON
ON
Flashing
Red / Blue LED
Flashing
still powered at 230V.
heating mode and vice versa.
Keep on pressing this button to select the automatic
the room temperature required is raised by 4°C in cooling
mode and reduced by 4°C in heating mode. The green
Indicates that the control is in cooling mode
mode
Indicates that the control is in heating
selected speed.
set automatically.
mode.
Indicates that the control is in "Autotest" mode.
E N G L I S H
.
protection
GB - 3