Type A Electronic Control
Assembly
sunlight or in not well ventilated areas.
the drill holes.
Avoid drilling with the plastic unit already placed on wall.
Fig. 2
Screw
Screw anchor
Control
CONTROL TYPE "A"
Fig. 5
GB - 2
the corresponding housing on the unit.
previously removed
IMPORTANT:
placed into a proper plastic conduit.
components to avoid damaging them.
before closing the control.
Fig. 3
Control is used in 2-pipe systems.
Functions
value.
Fan operation
Use the speed selecti
In manual
In the auto
control in relation to the temperature chosen.
ON and
automatically in relation to the water
temperature.
.
Fig. 4
economy mode.
.