Clear Tip Clog - Storch Airless ST 850 Mode D'emploi

Clear tip clog

To avoid injury, never point gun at your hand or into a rag!
In the event that particles or debris clog the spray tip, this
sprayer is designed with a reversible spray tip that quickly
and easily clears the particles without disassembling the
sprayer.
1. Engage trigger lock. Rotate spray tip to unclog position.
Disengage trigger lock. Trigger gun at waste area to clear
clog.
NOTE: If spray tip is difficult to rotate when turning to
the unclog position, perform Pressure Relief Procedure,
then turn Prime/Spray valve to spray position and repeat
step 1.
2. Engage trigger lock. Rotate spray tip back to spray
position. Disengage trigger lock and continue spraying.
Digital Display
The machine is equipped with a digital display. This secti-
on explains how to use this feature.
Pressure Display
1. Perform Pressure Relief Procedure.
2. Plug sprayer into grounded outlet. Turn ON/OFF switch
to ON position.
Original instruction
3. The pressure is displayed. Dashes indicate pressure is
less than 200 psi (14 bar, 1.4 MPa).
4. Press and release display button to display total run-
ning hours.
5. Press and hold display button to change pressure units
(psi, bar, or MPa).
Stored Data Display
1. Turn ON/OFF switch to OFF position.
2. To enter Stored Data Mode, press and hold display
button and turn ON/OFF switch to ON position.
166