Hedge Trimmer Safety Warnings - FLORABEST FHT 600 D3 Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 39
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation.
Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Service
Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Hedge trimmer safety
warnings
Keep all parts of the body
away from the cutter blade.
Do not remove cut material or
hold material to be cut when
blades are moving. Make sure
the switch is off when clearing
jammed material. A moment of
inattention while operating the hedge
trimmer may result in serious personal
injury.
Carry the hedge trimmer by the
handle with the cutter blade
stopped. When transporting
or storing the hedge trimmer
always fit the cutting device
cover. Proper handling of the hedge
trimmer will reduce possible personal
injury from the cutter blades.
Hold the power tool only on the
insulated grip surfaces, as the
cutting blade can come into con-
tact with concealed power lines
or its own mains cable. Contact
between the cutting blade and a live
cable may render metallic components
live and result in an electric shock.
Keep cable away from cutting
area. During operation the cable may
be hidden in shrubs and can be acci-
dentally cut by the blade.
Before the work, search the
hedge for concealed objects,
e.g. cable etc.
Hold the hedge trimmer cor-
rectly, e.g. with both hands on
the handles, if there are two
handles. Loss of control of the equip-
ment may result in injuries.
Wear suitable clothing and
work clothes when working
with the equipment. Do not hold
the equipment by the cutting
blade or lift it on the cutting
blade. Contact with the cutting blade
can cause injuries.
GB
IE
9

Publicité

Table des Matières
loading

Table des Matières