Environmental Protection; Important Note Regarding Product Liability; Correction Of Malfunctions - WAGNER W 890 FLEXIO Traduction Du Mode D'emploi Original

GB

24. Environmental protection

The device and all accessories and packaging have to be recycled in an
environmentally friendly manner. Do not dispose of the appliance with
household waste. Support environmental protection by taking the appliance
to a local collection point or obtain information from a specialist retailer.
Leftover paint and solvents may not be emptied into drains, the sewage system
or disposed of as household rubbish. It has to be disposed of separately as
special waste. Please pay special attention to the instructions on the product
packaging.

25. Important Note regarding Product Liability!

According to an EU directive, the manufacturer is only liable without limitation for faults
in the product if all parts come from the manufacturer or have been approved by the
manufacturer and have been mounted to the device and are operated properly. If third-
party accessories or spare parts are used, the manufacturer is exonerated wholly or partly
from his/her liability if use of the third-party accessories or spare parts have caused a
defect in the product.

26. Correction of Malfunctions

Malfunction
No coating
material emerges
from the nozzle
Coating material
drips from the
nozzle
36
Cause
•
Nozzle clogged
•
Material volume setting turned too
far to the left (-)
•
No pressure build-up in container
•
Container empty
•
Feed tube loose
•
Feed tube clogged
•
Ventilating bore (Fig.14, A) clogged
•
Coating material assembly at air
cap, nozzle or needle
•
Nozzle loose
•
Nozzle seal worn
•
Nozzle worn
W 890 Flexio
Remedy
➞ Clean
➞ Turn to the right (+)
➞ Tighten container
➞ Refill
➞ Insert
➞ Clean
➞ Clean
➞ Clean
➞ Union nut tighten
➞ Change
➞ Change