Maintenance; Storage; Spare Parts - WAGNER W 890 FLEXIO Traduction Du Mode D'emploi Original

GB
4) Push the nozzle seal (fig. 19, 6) over the needle (7); the groove (slot) should point
towards you.
5) Place the nozzle (fig. 19, 5) on to the gun body with the recess facing downwards.
Attention: Position of needle must be congruent with the nozzle aperture. (Fig.20)
6) Put the air screen (fig. 21, 4) in the air cap (3). Put both on the nozzle (5) and secure
with the union nut (2).
7) Adjust the setting ring (fig. 22, 1) so that the two "horns" grip the air cap and the red
adjustment lever rests on the pin.
8) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9) Insert the suction tube with container seal in the gun body.

20. Maintenance

WARNING!
Change the air filter if it is soiled. Unplug the power plug. Open the cover of the air
filter compartment (Fig. 23). Insert a new air filter into the compartment. Close the
cover of the air filter compartment.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the spray attachment (Fig. 24, item 5 and Fig. 25, item 6) and to the
O-ring of the plug connection of the air hose (Fig. 26, item 2).

21. Storage

Remove the hose and when storing it in the cover put in the gun handle first.

22. Spare Parts

Spare Parts List Standard spray attachment (Fig. 24)
Pos. Designation
Standard spray attachment complete with 600 ml container
1 Union nut
2 Air cap
3 Nozzle
4 Nozzle seal
5 O-ring of spray attachment
6 Ventilating hose, valve cover, diaphragm
7 Suction tube
8 Container seal
34
Never operate the machine without the air filter; dirt could
be sucked in and interfere with the function of the machine.
Do not store any objects in the air filter compartment.
W 890 Flexio
Order No.
2309 365
2362 873
2362 877
2362 878
0417 706
2362 875
2304 027
2362 876
2323 039