Purpose; General Requirements - Honeywell Miller MightEvac Manuel D'utilisation

Thank You
Thank you for your purchase of Miller fall protection equipment manufactured by Honeywell Safety
Products. Miller brand products are produced to meet the highest standards of quality at our ISO
All persons using this equipment must read, understand and follow all
instructions. Failure to do so may result in serious injury or death. Do
not use this equipment unless you are properly trained.
Questions?
It is crucial that the authorized person/user of this equipment read and understand these instruc-
tions. In addition, federal law requires employers to ensure that all users are trained in the
ment. Fall protection training should be an integral part of a comprehensive safety program.
Proper use of fall arrest systems can save lives and reduce the potential of serious injuries from
a fall. The user must be aware that forces experienced during the arrest of a fall or prolonged
suspension may cause bodily injury. Consult a physician if there is any question about the
user's ability to use this product. Pregnant women and minor children must not use this product.

1.0 Purpose

The Miller MightEvac
quick-activating retrieval mechanism for emergency evacuation.

2.0 General Requirements,

Warnings and Limitations
All warnings and instructions shall be
provided to authorized persons/users.
All authorized persons/users must
reference the regulations governing
space regulations), as well as applicable
ANSI or CSA standards. Please refer to
OSHA regulations, and ANSI and CSA
standards met by product.
All authorized persons/users of this equip-
space procedures.
Proper precautions should always be taken to
remove any obstructions, debris, material, or
other recognized hazards from the work area
that could cause injuries or interfere with the
operation of the system.
Us er In stru ctio ns - Engli sh
!
WARNING
CALL
1.800.873.5242
®
Self-Retracting Lifeline with Emergency Retrieval Hoist is a retractable
All equipment must be inspected before
each use according to the manufacturer's
instructions.
All equipment should be inspected by a
To minimize the potential for accidental
disengagement, a competent person must
ensure system compatibility.
Equipment must not be altered in any
way. Repairs must be performed only by
the manufacturer, or persons or entities
authorized in writing by the manufacturer.
Any product exhibiting deformities, unusual
wear, or deterioration must be immediately
discarded.
Any equipment subject to a fall must be
3
removed from service.
-