CAMPAGNOLO ULTRA-SHIFT Mode D'emploi page 23

BEFORE EVERY RIDE
DO NOT RIDE YOUR BICYCLE IF IT DOES NOT PASS THIS PRE-RIDE TEST
CORRECT ANY CONDITION BEFORE YOUR RIDE.
- Be sure that all of the components of your bicycle, including but not
limited to your brakes, pedals, handgrips, handlebars, frame and sea-
ting system, are in optimum condition and suitable for use.
- Be sure that none of the components of bicycle are bent, damaged
or out of alignment.
- Check to be sure that all quick release fasteners, nuts and bolts are
properly adjusted. Bounce the bicycle on the ground and listen and
look for anything which may be loose.
- Be sure that your wheels are perfectly centred. Spin the wheels to be
sure that they do not wobble up and down or from side to side, and
that they do not make contact with the fork legs or brake pads while
rotating.
- Check all reflectors to make sure that they are clean, straight and
securely mounted.
- Check you brake pads and cables to be sure they are in good con-
dition.
- Test your brakes in the beginning of your ride to make sure that they
are operating properly.
- Learn and follow the local bicycle laws and regulations, and obey all
traffic signals, signs and laws while you ride.
If you ever any comments, questions or concerns, please contact your
nearest Campagnolo Service Center. A list of service centers may be
found on our website at www,campagnolo.com.
WARNING!
Always wear protective gloves and glasses while working on
the front derailleur.
ENGLISH
23