Introduction; Intended Use; Features; Package Contents - Parkside PASSP 20-Li A1 Traduction Des Instructions D'origine

CORDLESS IMPACT WRENCH
PASSP 20-Li A1

Introduction

Congratulations on the purchase of your new
tool. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has a clockwise/
anticlockwise rotation, a 1/2" external square
drive bit holder and an LED working light. The light
on this appliance is intended to illuminate the im-
mediate working area of the appliance. The rotary
impact function of the appliance enables the power
of the motor to be converted into uniform rotary
impacts. The impact mechanism comes into effect
during tightening and loosening.
The appliance is designed for use by adults. Young
people under 16 years of age may only use the
appliance under supervision. The manufacturer ac-
cepts no liability for damages caused by improper
use or incorrect operation of the appliance.
Use this appliance only as described and for the
areas of applications specified. The tool is not
intended for commercial use. Any other usage or
modification of the tool is deemed to be improper
and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
16
GB │ IE
│
■

Features

Tool holder
Rotational direction switch/lock
Belt clip
LED work light
Torque display
Torque selector
ON/OFF switch/speed control
Battery pack*
Release button for the battery pack
High-speed charger*
Battery display LED
Battery charge level button
Red charge control LED
Green charge control LED
Sockets

Package contents

1 cordless impact wrench
3 sockets (17/19/21 mm)
1 belt clip
1 carrying case
1 set of operating instructions

Technical data

Cordless impact wrench: PASSP 20-Li A1
Rated voltage: 20 V
Rated idle speed: 1st gear: n
2nd gear: n
3rd gear: n
Impact frequency: 1st gear: n
2nd gear: n
3rd gear: n
Torque levels: 1st level 130 Nm
2nd level 400 Nm
3rd level 1356 Nm
Max. screw capacity: M33
Max. release torque: 1898 Nm
Tool holder: 1/2"
Battery: PAP 20 A3*
Type:
Rated voltage:
Capacity:
Cells:
(DC)
0–660 rpm
0
0–1250 rpm
0
0–1550 rpm
0
0–500 rpm
0
0–1500 rpm
0
0–1900 rpm
0
LITHIUM ION
20 V (DC)
4 Ah
10 (80 Wh)
PASSP 20-Li A1