Care And Maintenance - BRASSELER USA Forza V3 Manuel D'utilisation

9. HOLDER
9-1 HANDPIECE HOLDER
While the Handpiece is not in use, put the Handpiece on the Handpiece
Holder. ( Fig.14 )
NOTICE
To prevent injury, always mount Scaler Tip Cover S.
9-2 TIP HOLDER ( OPTION )
When a Tip is removed from the handpiece, use the Tip Holder for storage.
The Tip Holder is Autoclavable and holds up to 5 tips at once. To Autoclave,
tilt the tips in the direction of the arrow. (Fig.15)
(Reference section II for sterilization)
Tip

10. CARE AND MAINTENANCE

10-1 CLEANING OF OPTIC FIBER ( FORZA V3 LED )
Wipe the debris off the end of the Optic Fibers at the handpiece
with alcohol soaked cotton swab. ( Fig.16 )
CAUTION
Do not use any sharp pointed tools to clean the Optic Fiber End
Face. If the light is not working, contact Brasseler USA.
10-2 CHANGING O-RING
An O-Ring is located in the Handpiece Cord Connector. Use a
pointed tool to remove, and mount new O-Ring into the groove.
( Fig.17 )
O-Ring Order Code 0310020080.
Tip Holder
Fig.15
Optic Fiber End Face
10
Handpiece Holder
Fig.14
Fig.16
O-Ring
Fig.17