How To Use The Tip Card; How To Use The Tip Cover - BRASSELER USA Forza V3 Manuel D'utilisation

7. HOW TO USE THE TIP CARD

1) Place the neck of the Tip in the cut out.
2) Check wear of the Tip.
3) See the green, yellow and red line to check wear of the Tip. *See below what each color means. We recommend replacing a Tip when
the Tip meets the yellow line (wear of 1mm) to guarantee safe and effective use.
The Tip Card can be used to check the following tips : G1, G4, G6, G8, G9, P1/P1D, P10, and P20.
CAUTION
Tips are disposable components. The effi ciency of dental scaling
decreases approximately 25% when the top of the Tip wears 1 mm
and approximately 50% when it wears 2 mm. In addition, the vibration
condition changes due to wear, which may damage a patient's tooth
surface. Check the Tip wear condition with the Tip Card periodically,
and replace the Tip with a new one when needed.
8. HOW TO USE TIP COVER S (OPTIONAL)
Grip the Tip Cover S and insert it to the Tip. To remove, grip the Tip Cover S and the handpiece & pull. (Fig.13)
CAUTION
Carefully insert the Tip into the Tip Cover S. Avoid injuring the fi ngers.
The Tip Cover S is not designed for use as a Tip changing tool.
Fig.11
Slit
Green: No wear - Tip is OK
Tip replacement is not necessary.
Yellow: Wear of 1mm - Tip is showing some wear
Tip replacement is recommended.
Red: Wear of 2mm - Tip is badly worn
Tip replacement is necessary.
1mm
25%
Decrease
Slit
Tip Cover
9
2mm
50%
Decrease
Effi ciency
Fig.12
Tip
Tip-Handpiece Joint
Fig.13