Korg HT-70 Manuel D'utilisation page 9

2
1. Simultaneously press the [SONG] switch and [REVERB] switch.
The [SONG] switch's LED begins flashing.
2. Use the sound selector to choose the song you want to hear from the above list; the
selected demo song will begin playing.
If you don't select a song within three seconds, the songs will begin playing consecu-
tively, starting with sound demo number 1. When sound demo number 10 has finished
playing, playback will return to sound demo number 1 and will continue.
To select demo 2 or demo 3, turn the selector to Piano 1 and then press [
sary.
3. When the sound demo you selected has finished playing, playback will continue in suc-
cession to the next song.
4. During demo play, you can use the [
switch lamp comes on solid during play, and flashes during pause.) Pressing the [■]
switch will stop playback and reset the position to the beginning of the demo.
5. To stop playback, press the [SONG] switch.
The [SONG] switch will go dark, playback will stop.
• If you want to switch to a different sound demo, use the sound selector to switch the
demo song.
For example if sound demo number 1 is playing, but you want to switch to number 10,
simply turn the sound selector to STRINGS. The sound demo playback will switch to
number 10 and continue playing. Alternatively, you can press the [▲][▼] switches to
select a song. In this case, the position of the sound selector is ignored.
Demo play starts automatically ([
While a sound demo is playing, you can play the keyboard to play the same sound, but you
can't switch to a different sound.
You can't change the reverb setting while a sound demo is playing.
You can't change the tempo of a sound demo.
2
1, 4
1
2
] switch to pause and resume playback. (The
] lights up) when you change the selection.
▲ ▼
] or [ ] as neces-
9