Press the power switch to turn the power OFF, and then open the socket cap.
ess the power switch to turn the power OFF, and then open the socket cap.
2.
Release the battery lock.
elease the battery lock.
(1) Insert the key or hexagon wrench into the key cylinder of the battery mount.
Insert the key or hexagon wrench into the key cylinder of the battery mount.
(2) Support the battery with your hand, and turn the key or hexagon wrench clockw
Support the battery with your hand, and turn the key or hexagon wrench clockwise.
The battery is unlocked. The double latch plate holds the battery in the appropriate
The battery is unlocked. The double latch plate retains the battery in the designated
e battery is unlocked. The double latch plate retains the battery in the designated
place and prevents it falling out.
position and prevents it from falling out.
sition and prevents it from falling out.
If the battery does not go down into the designated position, pull out the battery w
If the battery cannot be slid into the appropriate position, pull out the battery with
the battery does not go down into the designated position, pull out the battery with
one hand, while turning the key with the other.
your hand while turning the key or hexagon wrench.
ur hand while turning the key or hexagon wrench.
(1)
(1)
Key cylinder
.
NOTICE
NOTICE
•
Use the charger for the specified e-bike only.
• If the battery is retained with a double latch plate, the double latch plate could
• If the battery is retained with a double latch plate, the double latch plate could
deform if struck by a strong external force, causing the battery to drop.
deform if struck by a strong external force, causing the battery to drop.
•
Connect the plug correctly.
•
Do not touch the plug with wet hands.
3.
Remove the battery.
emove the battery.
•
Do not store the charger with the mains lead wrapped round it. This could damage the
mains lead or the plug.
Carefully remove the battery while
refully remove the battery while
supporting it with your hand and pushing
pporting it with your hand and pushing
•
Do not touch the charger contacts with metal objects to avoid causing a short circuit.
the double latch plate.
e double latch plate.
•
Do not expose the charger to mechanical shocks.
•
Do not use the charger in damp locations.
•
Ensure the charger does not touch your skin in the same place for long periods while
charging.
•
Do not allow children to use the charger.
GAZ_Snelstart Shimano Steps_21_E02_V01.indd 51
Key cylinder
Key
Key
Charger
(2)
(2)
(2)
Double latch
plate
53
53
(2)
Double latch
plate
EN
31-08-2021 09:44