Mounting Performax Easy, Performax Easy Speed (Slide Bracket) - Simco-Ion Performax Easy Notice D'utilisation

5.4 Mounting Performax Easy, Performax Easy Speed (slide bracket)

Figure 5: Mounting Performax Easy and Performax Easy Speed
5.4.1- Mount the anti-static bar using the mounting materials provided:
(see fig. 3, 4 and 5)
5.4.2- Mount the feet (nr.1) to the machine, keeping the triangles (mounting method) in the
same direction.
5.4.3 Slide the brackets (nr.2) onto the anti-static bar (nr.3).
Keep the distance(s) between the brackets (nr.2) and the mounting feet (nr.3) equal and
fixate the bracket (nr.2) using the adjusting screw (nr.4).
5.4.4 Set the anti-static bar with the brackets (nr.5) onto the mounting feet and slide the entire
device in the opposite direction of the three points (mounting method).
5.4.5 Secure the anti-static bar in the mounting feet by turning the adjusting screws (nr.6) into
the bracket. You only need to secure the two outer brackets.
5.4.6 Connect the M12-connector of the power supply cable (max 30m @ 0,34mm
static bar and lead the cable safely to the power supply.
Performax Easy/Performax Easy Speed_UM_9752152130_NL_D_GB_F_V3_4
2
) to the anti-
40