Control; Mounting The Antic Static Bar - Simco-Ion Vicinion Notice D'utilisation

5.1 Control

- Check that the equipment is undamaged.
Check that the packing slip details match the details of the product received.
In case of problems or questions, please contact SIMCO (Nederland) B.V. or your local SIMCO
agent in your area.

5.2 Mounting the antic static bar

Attention:
- Conductive machine parts in the vicinity of the anti-static bar can have a negative
effect on its function.
- For optimal results, the anti-static bar must be mounted according to figure 3.
- Mount the anti-static bar:
• Position right in front of the place where static electricity is causing problems.
• At an optimal distance from the material to be neutralized: 10 - 75 mm
• With the emitters in the direction of the material to be neutralized.
Figure 3: Optimal position Vicinion
Vicinion_UM_9752152141_NL_D_GB_F_V1_3
Working
Free
distance
space "R"
10 – 75 mm
Space in circle free from
grounded objects
Surface to be neutralized
"R" = working distance
GB
BE
35