Overview; Application; Coating Materials - Titan ELITE 4500 2407310 Mode D'emploi

OVERVIEW

2
OVERVIEW
2.1

APPLICATION

The main area of application are thick layers of highly viscous
coating material for large areas and a high consumption of
material.
Priming and final coating of large areas, sealing, impregnation,
façade protection and renovation, rust protection and building
protection as well as heavy corrosion protection.
EXAMPLES OF OBJECTS TO BE SPRAYED
Large-scale construction sites, cooling towers, bridges, sewage
treatment plants and terraces.
DO NOT use this equipment to spray water or
acid.
Do not lift by cart handle when loading or
unloading.
Device is very heavy. Three-person lift is required.
Attention
8
2.2

COATING MATERIALS

PROCESSIBLE COATING MATERIALS
Diluting lacquers and paints or those containing solvents, two-
component coating materials, dispersion and latex paints.
No other materials should be used for spraying without Titan's
approval.
Pay attention to the Airless quality of the coating
i
materials to be processed.
The unit is able to process coating materials with up to
20,000 mPas. If highly viscous coating materials cannot be
taken in or the performance of the unit is to low, the paint must
be diluted in accordance with the manufacturer's instructions.
Stir coating material before starting to work.
Attention: Make sure, when stirring up with
i
motor-driven agitators that no air bubbles are
stirred in. Air bubbles disturb when spraying and
can, in fact, lead to interruption of operation.
COATING MATERIALS WITH ABRASIVE MATERIALS
These particles have a strong wear and tear effect on valves and
tips, but also on the spray gun. This impairs the durability of
these wearing parts considerably.
FILTERING
Sufficient filtering is required for fault-free operation. The unit
is equipped with a suction filter, an insertion filter in the spray
gun and a high pressure filter on the unit. Regular inspection
of these filters for damage or soiling is urgently recommended.
ELITE 4500