Description Of Unit; Airless Process; Instruction Manuals List; Functioning Of The Unit - Titan ELITE 4500 2407310 Mode D'emploi

ELITE 4500
3

DESCRIPTION OF UNIT

3.1

AIRLESS PROCESS

The main area of application are thick layers of highly viscous
coating material.
A diaphragm pump takes in the coating materials and transports
it via a high-pressure hose to the spray gun with the airless tip.
Here the coating material atomizes since it is pressed through
the tip core at a maximum pressure of 3300 PSI (22.8 MPa). This
high pressure has the effect of micro fine atomization of the
coating material.
As no air is used in this process, it is described as an AIRLESS
process.
This method of spraying has the advantages of finest
atomization, cloudless operation (depending of a correct unit
adjustment) and a smooth, bubblefree surface. As well as these,
the advantages of the speed of work and convenience must be
mentioned.
3.2

INSTRUCTION MANUALS LIST

The following is a list of the available instruction manuals for
this unit.
Online items can be downloaded at www.titantool.com
DESCRIPTION
Operation Manual,
(EN/FR/ES)
Service manual,
spare parts (EN/FR/ES)
FORM # HOW TO FIND
2418919 • included with unit
• online
2418920 • online
3.3

FUNCTIONING OF THE UNIT

The following section contains a brief description of the
technical construction for better understanding of the function:
Elite™ 4500 is a gas engine-driven high-pressure paint sprayer.
The gas engine (1) drives the hydraulic pump via planetary
gears (2). A piston (3) is moved up and down so that hydraulic
oil is moved under the diaphragm (4) which then moves.
The downwards movement of the machine opens the disk inlet
valve (5) automatically and coating material is sucked in.
During the upwards movement of the diaphragm, the coating
material is displaced and the outlet valve opens while the inlet
valve is closed.
The coating material flows under high pressure through the
high-pressure hose to the spray gun and is atomized when it
exits from the tip.
The pressure control valve limits the set pressure in the hydraulic
oil circuit and thus also the pressure of the coating material.
A pressure change when the same tip is used also leads to a
change in the amount of paint atomized.
DESCRIPTION OF UNIT
1
2
3
4
5
9