Pentair JUNG PUMPEN BAUFIX 100 3 Instructions De Service page 8

ENGLISH
Extended level compensation
In case of using an extension provided
by the customer (standard PVC pipe DN
300, DIN 19534 or 8062) ensure, that the
pump still can be reached for installa-
tion and maintenance (arm´s length).
The max. installation depth is 380 mm
measured from floor surface to the
pipework, respectively 630 mm down to
inlet center.
MAINTENANCE
The tank, the float switches and the foot
strainer of the pump should be inspect-
ed regularly and cleaned if necessary.
To service the pump, please refer to the
separate operating instruction.
ATTENTION! Always grease the screws
before using them to close the cover
plate and ensure the correct position of
the profiled seal.
8