Programmed Play - Sharp CD-M10000V Mode D'emploi

Programmed play

You can choose up to 32 selections for playback in the order you like.
1
Press the DISC SKIP button 3 times for the unit to read the infor-
mation of each disc to programme them.
2
Whilst in the stop mode, press one of
the 1 - 3 buttons to select the de-
sired disc.
3
Press the direct search buttons on
the remote control to select the de-
sired track.
You can also select a track by pressing the
SET (
4
Press the MEMORY/SET (MEMORY)
button to save the track number.
When the track is memorised, "MEMORY" will appear.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
6
Press the
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 2 - 4 to add tracks. The new tracks will be stored after the
Selected disc number
last track of the original programme.
Notes:
z Opening the disc tray automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or the
function is changed from CD/VIDEO CD (CD) to another, the programmed selec-
tions will not be cleared.
z During programme operation, random play is not possible.
z The programme function will not work in the P .B.C. mode. Whilst the programme
function is active, the P .B.C. function will be cancelled automatically.
Selected track number
PRESET
) button.
Playback order
( ) button to start playback.
01/10/30 CD-M10000V(X)E2.fm
CD-M10000V
ENGLISH
( ) or PRE-
1
2
3
4
5
6
7
E-20