Programmed Play - Sharp CD-CH1500H Mode D'emploi

Programmed Play

By specifying discs from 1 to 6, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
1
When in the stop mode, press the MEMORY button.
2
Press one of the DISC 1 - DISC 6 buttons to select the desired disc.
Selected disc number
3
Turn the jog dial to select the desired track.
Selected track number
4
Press the MEMORY button to save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be pro-
grammed.
All manuals and user guides at all-guides.com
6
Press the
7
Press the
z At this time, playback will not begin even if one of the DISC 1 - DISC 6 buttons is
pressed.
To clear the programmed selections:
Press the CLEAR button whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The MEMORY indicator will disap-
pear and all the programmed content will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the
last track of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the
Notes:
z Opening any tray of the programmed discs automatically cancels the programmed
Playback order
sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another function, the programmed selections will not be
cleared.
z During programme operation, random play is not possible.
Playback time
button.
button to start playback.
ENGLISH
01/1/9 E2.fm
or button.
E-17