Repeat Or Random Play; Programmed Play - Sharp CD-BK100W Mode D'emploi

„ Starting playback with a desired track
You can play a disc starting with the desired track.
1
Whilst in the stop mode, press one of the
mote control or DISC SKIP button to select the desired disc.
Selected disc number
2
Press the or button to select the desired track.
Selected track number
3
Press the / button to start playback.
Playback of the selected track is started. When the end of last track of the disc
selected is reached, the next disc will be automatically started.
To stop playback:
Press the (CD ) button.
Notes:
z When the DISC SKIP button is pressed during playback, the next disc will begin
automatically.
z When one of the 1 - 3 buttons on the remote control is pressed during play-
back, the selected disc will begin automatically.

Repeat or Random Play

„ Repeat play
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the
1 - 3 buttons on the re-
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed Play" section and then press the
twice.
To cancel repeat play:
Press the
" " will go out.
„ Random play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random
play.
To cancel random play:
Press the
Notes:
z If you press the
selected next by the random operation. On the other hand, the
not allow you to move to the previous track. The beginning of the track being
played will be located.
z In random play, the CD player will select and play tracks automatically. (You cannot
select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
wise, the disc(s) will play continuously.
/ button twice.
/ button again.
button.
button during random play, you can move to the track
Programmed Play (See page 15.)
CD-BK100W
/ button
button does
(CD ) button. Other-
ENGLISH E-14