Playing Karaoke - Sharp CD-M10000V Mode D'emploi

Playing karaoke

You can enjoy karaoke to video CDs, CDs, MP3 Discs, radio, cassettes, and other
external devices by connecting a separately available microphone to this unit.
1
Set the MIC LEVEL control to MIN to protect the speakers from
shock noise and to avoid disturbing noises.
2
Connect the microphone to the MIC socket.
z Use a microphone with a 6.3 mm (1/4") plug, an impedance of 600 ohms.
z Use a standard plug adaptor when using a microphone with a 3.5 mm (1/8")
diameter plug.
3
Press the ON/STAND-BY button to turn the power on.
4
Press one of the CD/VIDEO CD (CD), TUNER (BAND), TAPE (1
VIDEO/AUX buttons to select the audio source and play it.
If you wish to record, start recording in the TAPE 2 compartment. (Refer to pages
34 - 36 for details.)
5
Adjust the volume of the audio source using the VOLUME control.
6
Turn the MIC LEVEL control towards MAX to increase the micro-
phone volume and towards MIN to decrease it.
7
Press the ECHO LEVEL button on the remote control to increase
the microphone echo, and the ECHO LEVEL
it.
Notes:
z When you sing too loud through the microphone, your voice may be distorted
depending on the devices connected. If this happens, lower the microphone vol-
ume.
z If an extremely sensitive microphone is used, howling may be generated.
z Unidirectional microphone is more appropriate for vocal use.
If squealing occurs:
z Reduce the microphone volume.
z Change the direction of the microphone.
z Reduce the volume of the main unit.
z Move the microphone away from the speakers.
Caution:
z When not using the microphone, remove it from the MIC socket.
z When connecting or disconnecting the microphone, set the MIC LEVEL control to
MIN.
01/10/30 CD-M10000V(X)E4.fm
CD-M10000V
ENGLISH
2),
button to decrease
E-32
1
2
3
4
5
6
7