Programmed Play - Sharp XL-1000W Mode D'emploi

Programmed Play

You can choose up to 20 selections for playback in the order you
like.
1
Whilst in the stop mode, press the MEMORY/SET
(MEMORY) button to enter the programming save
mode.
2
Within 30 seconds, press the
the desired track.
Selected track number
or button to select
Playback time
3
Press the MEMORY/SET(MEMORY) button to save the
track number.
Playback order
4
Repeat steps 2 - 3 for other tracks. Up to 20 tracks can
be programmed.
5
Press the ( ) button to start playback.
To clear the programmed selec-
tions:
Press the CLEAR button on the remote
control whilst the "MEMORY" indicator
is flashing.
Each time the button is pressed, one
track will be cleared, beginning with the
last track programmed.
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR button on the remote control. The "MEMORY" indicator will
disappear and all the programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indica-
tor will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
z Opening the CD compartment automatically cancels the pro-
grammed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by
mode or the function is changed from CD to some other function,
the programmed selections will not be cleared.
z During programme operation, random play is not possible.
Total playback time
E-18
ENGLISH