Programmed Play - Sharp MD-E9000H Mode D'emploi

Programmed Play

You can choose up to 20 out of 99 tracks for playback in the order you like.
1
Press the CD H H H H H or MD H H H H H button.
2
Press the MEMORY/ENTER button to enter the programming save
mode.
3
Use the direct buttons to select the desired track.
Selected track number Playback order
4
Repeat step 3 for any other tracks. Up to 20 tracks (P20) can be
programmed.
E-17
*07-E17-19-MD9000H(SEEG) 17
5
Press the CD H H H H H or MD H H H H H button.
6
Press the CD 06
grammed selections.
After all of the programmed tracks have finished, the unit will automatically
stop.
To clear the programmed selections:
Press the CLEAR/DELETE button on the remote control whilst the "MEMORY" indi-
cator is flashing.
Each time the button is pressed, one track will be cleared, beginning with the last
track programmed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR/
DELETE button to turn off the "MEMORY" dis-
play.
The programme contents will be erased.
When you open the CD compartment cover
or eject a MiniDisc, the programmed play
mode will be cancelled.
To check which tracks are programmed:
Whilst the unit is in the stop mode, press the
5/3 or 2/4 button.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 2 - 5 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
It is not possible to insert a track between programmed tracks.
Programming and cancelling are not possible during playback or in the pause mode.
Playback time
01.4.19, 3:08 PM
Total number of tracks Total playback time
06 or MD 06 06 button to start playback of the pro-
06 06 06 06
06 06