Antari Z Série Mode D'emploi page 4

Up-/Down keys. By pressing the Function-key twice, the display shows "Duration Set".
Adjust the duration of each fog emission (within the range of 1 to 20 seconds) by means of
the Up/Down keys. Under the menus "Timer Out" and "Volume Out" you can adjust the
output volume by means of the Up/Down keys. The menu "DMX Add" refers to adjusting
the DMX address for DMX control or synchronization. Adjust the desired DMX-address by
means of the Up/Down keys.
2. Press the Timer key to activate the timer function. The display shows the adjusted interval
and the device counts the seconds down to "0". After that, the fog emission is triggered at
the volume adjusted under "Timer Out". The duration depends on the settings adjusted
under "Duration Set". If you wish to deactivate the timer function, press the Timer key
once more.
3. Press the Volume switch for immediate triggering of the fog emission at the volume
adjusted under "Volume Out". Press the Volume switch once more in order to stop the fog
emission.
4. Press the Manual key for immediate triggering of the fog emission at 100 % volume. Let
the Manual key loose in order to stop the fog emission.
For control of the DMX settings please refer to the section on Page 6 titled Antari
Z-Series Onboard DMX Fog Machine Settings
Z-4: 10 meter wired remote controller with five-prong plug for ANTARI Fog Machine
models Z-800 and Z-1000. Its two knobs allow the operator to customize fog machine
functions by adjusting output duration and interval. Press the yellow TIMERS button to
activate the timer function. Adjust the interval between each fog emission (within the
range of 10 seconds to 5 minutes) by means of the INTERVAL control knob. Adjust the
duration of each fog emission (within the range of 1 to 10 seconds) by means of the
DURATION control knob. When pressed, the green MANUAL button overrides all other
function controls, and activates maximum output. Press the red CONTINUOUS button for
continuous output.
Z-5: Wireless remote controller with five-prong plug for ANTARI Fog Machine models Z-
800 and Z-1000. Remote operation is possible up to a distance of 50 meters.
Z-8: 10 meter wired timer and volume remote control for the Z-1200 ANTARI Fog
Machine. To engage the timer function presses the yellow button on the handheld unit.
The duration knob regulates the length of time of the smoke blast. The blast can be set
for between 1 and 15 seconds. The interval knob controls the amount of time between
blasts. This can be set between 10 and 255 seconds. For continuous fogging, depress
the red button marked Continuous. This will set the unit to fog steadily at the selected
volume. The volume of fog produced is regulated via the output knob. This varies
between 0 and 100% of maximum volume output. The green Manual button overrides
any timer and/or volume settings to deliver a full volume blast of fog for as long as the
button is held down.
Cleaning your fog machine regularly will help reduce costly parts
Maintenance
replacement and repair charges.
4