Using The Vanity Mirror; Using The Table Lamp; Using The Bluetooth Speaker; Bluetooth Pairing - Silk-n MUSIC MIRROR RM249-DL Mode D'emploi

power source (e.g. PC, laptop or powerbank) for charging.
4. Plug the USB wall adapter into a mains socket for charging.
During charging, the charging indicator light
red.
5. The charging indicator light will become blue when the
product is fully charged after about 3 to 4 hours. Unplug the
USB wall adapter from the mains socket and disconnect the
USB cable from the product.
6. Properly close the charging port cover.

6 Using the vanity mirror

• Press the touch On/Off / dimmer switch
light ring
10
• When the LED light ring is switched on, press and hold the
touch On/Off / dimmer switch to adjust the brightness (from
maximum to minimum brightness or vice versa) of the LED
light ring. Release the touch On/Off / dimmer switch when the
desired brightness is reached.
• When the LED light ring is switched on, press the touch light
mode switch
warm or bright).
• To use the magnifying mirror
onto the centre of the vanity mirror
The magnet at the centre position will hold the magnifying
mirror in place. The optimal distance to use the magnifying
mirror is within 10 cm.

7 Using the table lamp

1. Flip the vanity mirror
The LED table lamp
will switch on (see Fig. D).
2. To switch off the LED table lamp, gently push the vanity mirror
downwards until the lamp is switched off.

8 Using the Bluetooth speaker

8.1 Bluetooth pairing

1. Press and hold the Bluetooth button
Bluetooth function (see Fig. C).
on or off.
repeatedly to select a light mode (natural,
2
up until it is horizontally positioned.
9
on the bottom of the vanity mirror
3
5
to switch the LED
1
(5× magnification), attach it
11
(see Fig. B).
9
to switch on the
8
will become
12
EN