Operating Modes; Auto Mode; Sleep Mode; Manual Mode - Boneco S450 Mode D'emploi

30

OPERATING MODES

en

AUTO MODE

When switched on, the appliance is in AUTO mode,
which is indicated by this symbol:
AUTO
The desired relative humidity level is pre-set to 50%
in AUTO mode. The appliance selects the suitable
performance level Low "L" / Medium "M" / High "H"
to reach the relative humidity value of 50% as soon
as possible.
In AUTO mode, the target value can be modified at
any time using the output button. This switches off
AUTO mode, and the appliance is now in manual
mode:
Pressing the AUTO button activates AUTO mode
again:

SLEEP MODE

Pressing the SLEEP button allows for switching from
AUTO mode to SLEEP mode and back:
The desired relative humidity level is pre-set to 45%
in SLEEP mode. The appliance selects the suitable
performance level Low "L" / Medium "M" to reach
the value of 45% using as little energy as possible:
In SLEEP mode, the relative humidity level can be
modified at any time using the setting buttons.
If the performance level is modified using the out-
put button, SLEEP mode switches off automatically,
and the appliance is then in manual mode:
Pressing the SLEEP button twice activates SLEEP
mode again.

MANUAL MODE

The appliance can be operated at three perfor-
mance levels. Pressing the output button switches
between the low "L" (night mode), medium "M"
(normal mode) and high "H" (high performance
AUTO
mode) levels:
The desired performance level is shown in the dis-
play:
DESIRED
H
M
L