Setting Relative Humidity Level; About The Hygrostat; Display "E2; Quick Display - Boneco S450 Mode D'emploi

SETTING RELATIVE HUMIDITY LEVEL

ABOUT THE HYGROSTAT

The appliance is fitted with a hygrostat. It measures
the relative air humidity and automatically switch-
es off humidification in the appliance when the
desired value is reached. The internal ventilation
remains switched on to guarantee an exact display
of the relative humidity level. If the relative humid-
ity falls below the desired level, the humidification
automatically switches on again.
A relative humidity of between 40% and 60% is rec-
ommended. The setting for the relative humidity
ranges from a minimum of 30% to a maximum of
70% or "Co" continuous operation.
SETTING RELATIVE HUMIDITY LEVEL
The setting buttons allow the user to select the de-
sired relative humidity level in steps of 5%:
During the selection process, the desired value is
blinking. The word DESIRED appears on the display.
DESIRED
H
M
L
After a few seconds, the display automatically
switches to the value of the current relative humid-
ity and reads CURRENT. When the desired value is
reached, the display reads both DESIRED and CUR-
RENT.

DISPLAY "E2"

When "E2" appears on the display, the current rela-
tive humidity level has reached 90%. The appliance
automatically switches off for safety reasons. Once
the relative humidity level falls below 85% again,
the appliance switches on again.

QUICK DISPLAY

When the appliance is switched off, the current
relative humidity can be shown in the display by
briefly pressing the setting buttons:
This display automatically goes out after a few sec-
onds.
29
en