Siren Module - Elkron HPA701 Notice D'installation

3.0 SIREN MODULE

Supply positive
+
Supply negative
-
Alarm block input. Programmable NC or balanced (6K8 – 5%) referred to positive or negative
BL
System status input. Programmable NC or balanced (6K8 – 5%) referr. to positive or negative
TC
Failure output: it normally provides a positive that goes to GND in case of failure
F
Bearing terminals for micro-switch wires against tampering and protecting module wires (if
TA
present)
Data line for protecting module
D
Positive available for protecting module supply (if present) and flashlight module
+P
LED flash LED command
L
System status LED command
L1
Failure status LED command
L2
Horn connecting terminals
AP
TEST
+
- BL
TC F TA TA
25/44
A B C D E F G H I L
BATT 12V
D +P L L1
HPA701 - HPA702L - HPA702LG - HPA703XP
Terminals not
mounted on
HPA701 model
L2