Technical Characteristics - Elkron HPA701 Notice D'installation

7.0 TECHNICAL CHARACTERISTICS

Rated supply voltage..............................................................................13,8 V— , 14,4V— *
Operating voltage (min – max) ..............................................................9 ÷15 V—
Absorption at rest ...................................................................................4 mA (HPA701, HPA702L, HPA702LG)
Max alarm absorption.............................................................................650 mA (HPA701)
Flash absorption (HPA702L ÷ HPA702LG)............................................100 mA peak; 7 mA medium
Flash absorption (HPA703XP)....................................................................... 900 mA peak; 65 mA medium
Max central unit absorption ....................................................................150 mA
Acoustic pressure...................................................................................>102 dB (A) @ 3 m
Operating frequency...............................................................................1400 ÷ 1600 Hz
Input lock voltage (NC to positive) .........................................................4,3 V— min. ÷ Vcc max
Input lock voltage (balanced to positive) ................................................3,5 ÷ 7,5 V—
Opening/removal preventing micro-switch .............................................1 A @ 24 V—
Protection module tamper contact (solid state relay) .............................50 mA @ 50 V— ; R typ = 20 Ω
Operating temperature declared by the manufacturer ...........................-25 °C ÷ +70 °C
Envelope protection degree declared by the manufacturer....................IP43 / IK06
External cover material ..........................................................................die-cast aluminium
Flash cover material (HPA702L, HPA702LG, HPA703XP)....................polycarbonate
Internal cage material (HPA702LG, HPA703XP) ...................................zinc-coated 8/10 sheet
Bottom material ......................................................................................glass-charged thermoplastic
Allocable battery.....................................................................................12V 2,2 Ah
Dimensions (l x h x p).............................................................................237 x 287 x 90 mm
*): central units arranged to provide a 14.4V voltage allows the optimum recharge of the internal battery,
compensating for the voltage drop of the protecting diode inside the siren.
IMPORTANT: Batteries must be deemed dangerous wastes
(E.W.C. 160601) and therefore they must be delivered to
authorised disposal operators.
8 mA (HPA703XP)
750 mA (HPA702L, HPA702LG)
1550 mA peak (HPA703XP)
31/44 HPA701 - HPA702L - HPA702LG - HPA703XP