Process Data Structure (Pd Input Descriptor); Diagnostic Data; Error Messages - Balluff BML SL1-ALZ-ZZ Série Notice D'utilisation

BML SL1-ALZ _-_ _ ZZ- _ _ _ _ - _ _ _ _
Absolute Magnetically Coded Position Measuring System
6
IO-Link-Smart Sensor Profile (BML SL1-ALZ0-U1ZZ-...) (continued)
6.5.5

Process data structure (PD Input Descriptor)

This parameter describes the composition of the process
data variables used.
BML SL1-... processes the process data variable as
follows:
Subindex Values
0x03
0x01 0x20
0x00
Tab. 6-6: Process data structure
6.5.6

Diagnostic data

Index Subindex Parameters
0x0028 (40) 0 Process Data Input
Tab. 6-7: Diagnostics parameters
6.6

Error messages

The following error messages are stored for failed
parameterization:
Error code Error message
0×8011 Index not available
0×8012 Subindex not available
0x8020 Service temporarily not available
0×8030 Value out of range
0×8033 Parameter length overrun
0×8034 Parameter length underrun
0×8036 Function temporarily unavailable
Tab. 6-8: IO-Link specification error messages
www.balluff.com
Description
Signed Integer
32 bit length
0 bit offset
Size Access
4 bytes Read Only
Values
This parameter contains the current position value
or the last position value before an error occurred.
english 23