Silk-n Lipo Mode D'emploi page 20

Before cleaning:
U
Disconnect the treatment unit from all other parts (belt, electrode
pads, connectors, stand/charging cradle). Disconnect the stand/
EN
charging cradle from the electricity supply.
U
Do not use abrasive cleaners or chemicals to clean any parts.
U
Clean each treatment unit and stand/charging cradle with a damp
cloth using a mild detergent, then wipe it dry with a clean cloth.
C
Do not clean any of the parts in the dishwasher.
8.2 Cleaning the electrode pads
U
After each use, wipe each electrode pad and dry with a cloth.
U
Do not store them in a closed box or drawer until they are completely dry.
8.3 Replacing the electrode pads
U
Do not use electrode pads if they are damaged. If that happens, replace
with new ones.
8.4 Cleaning the belt
The belt materials are: External: Nylon / Middle layer: SBR / Internal: Nylon.
Please note the cleaning instructions.
Hand wash only
Do not bleach
Do not iron
Do not dry clean
Do not tumble dry
18