Voltage - VWR Bead Mill Manuel D'utilisation

1.
2.
3.
4.
- Remove Warning stickers from the back of the unit and check that the voltage
matches the voltage delivered by your electric power supply.
CAUTION: DO NOT connect the unit to the main power supply until correct voltage is selected.
- Plug the unit into power supply using the supplied power cord.
CAUTION: If the voltage supplied to the unit is higher than what is indicated on the
back of the unit, the electronics will be irreversibly damaged, voiding the warranty.
Overview
1. Lid
2. Drive Hub
3. Tube Carriage
4. Lid Latch
The Bead Mill consists of the following:
Description
Bead Mill Assembly
Power Cord
Spare Fuse
User Manual

Voltage

5. Keypad
6. ON/Off Switch
7. 120V/220V Fuse
8. Power Cord Port
Quantity
1
1
1
1
15 = 100 - 120V
30 = 220 - 240V
5.
6.
7.
8.
4