Anti-Drip System - SilverCrest SDBR 420 A2 Mode D'emploi

3) Select the appropriate temperature setting with the temperature
control 4.
NOTE
Always place the iron on the stand 6 while it heats up.
►
When the iron is placed on the stand 6, steam production is
►
automatically stopped.
The indicator lamp 9 lights up. The indicator lamp 9 goes out
■
once the set temperature has been reached.
4) Wait until the indicator lamp 9 goes out.
5) If you want to iron with steam, press the steam switch
that it disengages and protrudes beyond the appliance surface.
The temperature control 4 must be set in the
produce steam.
NOTE
The indicator lamp 9 may come on and go out several times
►
during this process. This is not an appliance malfunction! It
merely indicates that the appliance is heating up again to
maintain the temperature.
6) When you want to stop ironing, turn the temperature regula-
tor 4 to MIN, press the steam switch
plug from the mains power socket.

Anti-drip system

This iron has an anti-drip system. This stops water from dripping from
the sole of the iron 8 when the temperature is too low to produce
enough steam.
This prevents water stains on clothing.
│ GB │ IE
■ 12
3 so
/MAX range to
3 in and remove the
SDBR 420 A2