Chapter 7. Ordinary Maintenance; Instructions For Ordinary Maintenance Work; Cleaning Of Cutting Blade; Machine Cleaning - Minipack-Torre Ministretch Mode D'emploi

Chapter 6. Safety standards
6.1. Warnings
•
Do not use the machine for purposes other than those indicated in the sales agreement.
•
Do not allow not authorized personnel to repair or carry out any other type of intervention on the machine
•
The operator must be aware of the indications that regard him and must be always informed by the department head
of the risks involved in his work.
•
Eliminate any condition of danger for safety before using the machine and always inform the person in charge of the
department about any possible irregularity in the machine operation.
•
Do not use the machine when damaged
•
It is forbidden to tamper safety devices and circuits.
•
It is forbidden to operate with safety devices off or with fixed guards not installed.
•
It is forbidden to abandon the machine with the guards dismantled or wrongly assembled.
•
During operation, the electric cabinet shall always remain closed.
•
The manufacturer disclaims any responsibility for damage to people or property arising out of failure to comply with
safety norms.
It is forbidden to use the machine withent the transparent cover (19) (figure 6.1.C page 50).
It is forbidden to loose the bolt (20) and the adjusting screw of the magnets (21).
Packaging be compromised (figure 6.1.D page 50).

Chapter 7. Ordinary maintenance

7.1. Instructions for ordinary maintenance work

ORDINARY MAINTENANCE MUST BE CARRIED OUT BY QUALIFIED, APPROPRIATELY TRAINED STAFF.
Before carrying out maintenance, switch the machine off with the main ON/OFF switch, disconnect
it and wait for the machine to cool down!
Wear protective gloves during maintenance operations!

7.2. Cleaning of cutting blade

Using a dry cloth, wipe off the residues clinging to the blad (figure 7.2. page 50).

7.3. Machine cleaning

To clean the transparent cover (19) clean both the outer and the inner side with water and soap only
(figure 7.3. page 50).
Do not use any detergents with solvents which could damage the transparent cover (19) and reduce
the transparency.
Use a cloth moistened with water for the cleaning of the machine.
17
GB
GB