Publicité
Les langues disponibles
Les langues disponibles
Standard view
18
The display is reset to the standard view (view after switching on with thermocouple connected)
by unplugging and reconnecting a thermocouple. The standard view can also be set by pressing
the ESC button.
Data transfer
The device features a Bluetooth
function that enables wireless data transfer to mobile devices
®*
with a Bluetooth
interface (such as a smartphone or tablet).
®*
The system prerequisites for a Bluetooth
connection are specified at http://laserliner.com/info?an=ble
®*
The device can set up a Bluetooth
®*
connection with Bluetooth 4.0 compatible devices.
The range is set to a maximum distance of 10 m from the terminal device and greatly depends on the
ambient conditions such as the thickness and composition of walls, sources of interference as well as
the transmit / receive properties of the terminal device.
Once it has been activated, Bluetooth
remains switched on indefinitely as the radio system is designed
®*
with exceptionally low power consumption.
A mobile device can link up to the active measuring device via an app.
Application (app)
An app is required to use the Bluetooth
function.
®*
You can download the app from the corresponding stores for the specific type of terminal device:
!
Make sure that the Bluetooth
interface of the mobile device is activated.
®*
After starting the app and activating the Bluetooth
function, a connection can be set up between
®*
a mobile device and the measuring device. If the app detects several active measuring devices, select
the matching device.
This measuring device can be connected automatically the next time it is switched on.
* The Bluetooth
word mark and the logo are registered trademarks of Bluetooth SIG Inc.
®
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and solvents.
Remove the battery pack before storing for longer periods. Store the device in a clean and dry place.
Do not touch the lens.
Calibration
The meter needs to be calibrated and tested on a regular basis to ensure it produces accurate
measurement results. We recommend carrying out calibration once a year.
20
EN
Publicité
