LaserLiner ThermoMaster Plus Mode D'emploi page 15

Temperature measurement (T1, T2)
5
With one thermocouple
When measuring with one thermocouple, the
measured value of the connected thermocouple
T1 or T2 is shown in line A. The display shows
whether T1 or T2 is connected.
Show MAX / MIN / AVG / T2-T1
6
With one thermocouple
TIP: When line A is set
to MAX and line B to MIN
!
a direct MAX/MIN comparison
can be made with one thermo-
couple.
ThermoMaster Plus
With two thermocouples
The measured value of thermocouple T1
is shown in line A and the measured value
of thermocouple T2 in line B.
15
EN