LaserLiner ThermoMaster Plus Mode D'emploi page 16

With two thermocouples (Example T1)
Press button A to show the MAX,
MIN, AVG values of thermocouple
T1 as well as the difference T2-T1.
Press button B to show the MAX,
MIN, AVG values of thermocouple
T2 as well as the difference T1-T2.
Memory function / call up memory
7
The device has 10 storage locations.
The current measured value display is stored at the next free memory location by
short-pressing the LOG button. An acoustic signals confirms successful storage.
1 sec
The measured value memory is called up by long-pressing the LOG button.
The measured value view and storage location are shown alternately.
3 sec
The measured value memory is exited by short-pressing the ESC button.
1 sec
16
EN
Change storage
location