Chain Configuration; Selecting The Chain; Starting/Stopping The Chain - Korg BEATLAB BTL-1 Mode D'emploi

Chain configuration

TEMPO
CHAIN 1 PRG 1 2
5 5
PROGRAM
TEMPO
CHAIN 2 140 1 2
10 11
PROGRAM
TEMPO
CHAIN 8 72 1 2
PROGRAM 15 15
- When a chain is replayed, bars 1 to 16 are re-
played in this order. On completion of replay of
bar 16, the BEATLAB returns to bar 1 and re-
peats eplay. When you specify the end com-
mand to a bar, symbol "- -" appears on the LC
display. In this case, the BEATLAB continues
replay from bar 1 to the bar just before the one
having the end command, then returns to bar
1. In Chain 2, for example, because bar 3 has
BAR
3 4 5 16
• • •
6 6 7 6
• • •
BAR
3 4 5 16
• • •
--
• • •
BAR
3 4 5 16
• • •
16 16 17
• • •
the end command, the BEATLAB returns to
bar 1 after replaying bar 2, resulting in alterna-
tive replay of bars 1 and 2.
- You can specify a tempo to the entire chain, in
which case the programs are all replayed in
the tempo you specify. Otherwise you can re-
play the individual programs in the tempos
specified to them.

Selecting the chain

(1) In the chain mode, press the parameter se-
lection key positioned under "CHAIN."
(2) Enter the chain number using the
keys or the numeric keys. Specify the chain
number by one digit.
When selecting a chain while another chain
is replayed, the newly selected chain starts
on completion of current program of the bar.

Starting/stopping the chain

(1) Press the START/STOP key to start replay
of a chain.
(2) Press the START/STOP key to stop replay
and
13