Sartorius YDH12CWS Mode D'emploi page 4

Mounting the Column on the Short Side
Use 3 screws to attach the retainer to the bottom
of the indicator.
Remove the load plate from the weighing
platform.
Position the retainer plate over the middle of the
short side of the weighing platform and secure it
using 4 bolts and 4 nuts.
Guide the power cord and the weighing platform
cable through the slots on each side of the
retainer.
Place the load plate on the weighing platform.
k To connect the weighing platform cable to the
indicator, please refer to the instructions in the
Combics installation and operating instructions.
Combics 1
O T
4