Helpful Hints And Tips - ZANKER KEV6442FBB Notice D'utilisation

To start the Automatic Heat Up function the cooking
zone must be cold (no
the cooking zone again and again until the necessary
heat setting comes on. After 3 seconds
the display.
To stop the function touch
Timer
Use the Count Down Timer to set how long the cooking
zone operates for only this one time.
Set the Timer after the selection of the cooking
zone.
You can set the heat setting before or after you set the
timer.
• To set the cooking zone:touch
until the indicator of a necessary cooking zone
comes on.
• To activate or change the Timer: touch
of the timer to set the time (
When the indicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the cooking zone with
and touch to deactivate the Timer. The re-
maining time counts back to
the cooking zone goes out.
• To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates
00
and flashes. The cooking zone deactivates.
• To stop the sound: touch
You can use the Timer as a minute minder while the
cooking zones do not operate. Touch
to set the time. When the time comes to an end, the
00
sound operates and
• To stop the sound: touch

Helpful hints and tips

Cookware
• The bottom of the cookware must be as thick
and flat as possible.
• Cookware made of enamelled steel and with
aluminium or copper bottoms can cause the
colour change on the glass-ceramic surface.
18
in the display). Touch
comes on in
.
again and again
or
00 99
- minutes).
00
. The indicator of
. Touch
flashes
Lock
of
When the cooking zones operate, you can lock the con-
trol panel, but not
of the heat setting.
First set the heat setting.
To start this function touch
on for 4 seconds.
The Timer stays on.
To stop this function touch
you set before comes on.
When you stop the appliance, you also stop this func-
tion.
The child safety device
This function prevents an accidental operation of the
appliance.
To activate the child safety device
• Activate the appliance with
settings.
• Touch
for 4 seconds. The symbol
• Deactivate the appliance with
To deactivate the child safety device
• Activate the appliance with
settings. Touch
comes on.
• Deactivate the appliance with
To override the child safety device for only one
cooking time
• Activate the appliance with
comes on.
• Touch
for 4 seconds. Set the heat setting in 10
or
seconds. You can operate the appliance.
• When you deactivate the appliance with
child safety device operates again.
Energy saving
• If it is possible, always put the lids on the cook-
ware.
• Put cookware on a cooking zone before you
start it.
• Stop the cooking zones before the end of the
cooking time to use residual heat.
. It prevents an accidental change
. The symbol
. The heat setting that
. Do not set the heat
.
. Do not set the heat
for 4 seconds. The symbol
.
. The symbol
comes
comes on.
, the