This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Exit
To return to the settings menu.
Settings menu
Use the
(DOWN) or
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Light
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
BackLight Time
This function allows the user to set the
backlight on time during which the display
remains lit after the last command given
(default value 30 seconds).
Keyboard Beep
This function allows the user to enable or
disable the buzzer (emitted each time a key
is pressed).
Exit
To return to the settings menu.
Language menu
EV-030
Confirm with
Confirm with
Settings
C o n t r a s t
L i g h t
B k L i g h t T i m e
K e y b . B e e p
E x i t
(UP) key to move around the parameters.
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Confirm with
Confirm with
Language
L a n g u a g e
E x i t
= Yes
= No
3 0
Ye s
= No
= Yes
E n g l i s h
23
English
Rev. 15 – 2022