Connecting A Tv And Playback Components; Connecting Using Hdmi - Pioneer VSX-821-k Mode D'emploi

Masquer les pouces Voir aussi pour VSX-821-k:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

02
Connecting your equipment
02

Connecting a TV and playback components

Connecting using HDMI

If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player, etc.), you
can connect it to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient
Control with HDMI functions can be used (see Control with HDMI function on page 38).
• The following connection/setting is required to listen to the sound of the TV over this
receiver.
-
If the TV does not support the HDMI Audio Return Channel function, connect the receiver
and TV with audio cables (as shown).
If the TV supports the HDMI Audio Return Channel function, the sound of the TV is input
-
to the receiver via the HDMI terminal, so there is no need to connect an audio cable. In
this case, set ARC at HDMI Setup to ON (see HDMI Setup on page 38).
Important
• If the receiver is connected to a TV using an HDMI cable, the on-screen display (OSD) will
not be displayed. Be sure to use a standard RCA analog video cable to connect. In this
case, switch the TV input to analog to see the OSD screen (for setup, etc.) on the TV.
• When the Control with HDMI function is ON and the receiver is connected to a compatible
TV with an HDMI cable, and you switch the input of the TV to composite or component, the
input of the receiver may automatically switch to TV/SAT. If this happens, switch the
receiver's input back to the original input, or turn OFF the Control with HDMI function (see
HDMI Setup on page 38).
14
En
HDMI
DVR/BDR IN
DVD IN
VIDEO
MONITOR
TV/SAT
OUT
IN
DVR/
BDR
OUT
IN
IN
1
DVD
(
)
ASSIGNABLE
IN
2
(
DVR/
BDR
)
MONITOR
OUT
Y
P
COMPONENT VIDEO
HDMI OUT
HDMI/DVI-compatible
Blu-ray Disc player
VIDEO IN
This connection is
necessary in order to
see the OSD of the
unit on the TV.
HDMI/DVI-compatible TV
COAXIAL
OUT
OPTICAL
BD IN
VIDEO 1 IN
IN
IN
IN
1
1
2
ASSIGNABLE
ASSIGNABLE
(
CD
)
(
TV/SAT
)
(
CD-R/TAPE
)
AUDIO
SURR BACK/
DVR/BDR
CD-R/TAPE
FRONT HEIGHT
ADAPTER PORT
L
BD
( Single )
(
OUTPUT 5 V
IN
OUT
PRE OUT
0.1 A MAX
)
R
ANTENNA
FM
UNBAL
CD
75
L
AM LOOP
SIRIUS
FRONT
CENTER
DVD IN
IN
IN
A
R
L
R
IN
L
IN
IN
R
SUBWOOFER
P
TV/SAT
BD
DVD
B
R
PRE OUT
R
L
OPTICAL
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
HDMI IN
Select one
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound over
the receiver.

Publicité

Table des Matières
loading

Table des Matières