Other Connections; Connecting Auxiliary Components; Automatic Switching To Audio In Input (For North American Models Only) - Pioneer X-HM16 Mode D'emploi

Other connections

Chapter 8:
Other connections
CAUTION
• Before making or changing the connections, switch off
the power and disconnect the power cord from the AC
outlet.
• We will not accept responsibility for damage arising from
the connection of equipment manufactured by other
companies.

Connecting auxiliary components

Connect your auxiliary playback component using the
AUDIO IN input on the rear panel.
3.5 mm stereo mini-
plug cable
(commercially
available)
1 Press AUDIO as the input source.
When AUDIO IN is selected, "Audio In" is displayed on the
main display.
Note
• If the AUDIO IN mini-plug jack is connected to auxiliary
phones jack, the volume of the unit will be adjusted by
the volume on the playback component. If the sound is
distorted after you lower the volume of the unit, try
lowering the volume on the auxiliary playback
component.
Portable audio player, etc.
Automatic switching to Audio In
input
(For North American models only)
This function automatically switches to "AUDIO IN" when
there is audio input to the AUDIO IN jack.
1 Press MENU and then press / until
"Audio In detect" appears on the display.
Press ENTER and then press / to switch
2
Audio In detect ON/OFF.
• It is set to OFF in the factory setting.
Note
• When the Audio In detect is ON, "Audio In Det ON" is
displayed on the main display.
• When the Audio In detect is OFF, "Audio In Det OFF"
is displayed on the main display.
08
25
En