Connecting A Tv And Blu-Ray Disc Player Or Dvd Player - Pioneer SX-319V Mode D'emploi

Connecting up

Connecting a TV and Blu-ray Disc player or DVD player

This page shows you how to connect your BD/DVD player and TV to the receiver.
4
R L
ANALOG AUDIO OUT
TV
1 Connect the HDMI output on your BD/
DVD player to the HDMI BD/DVD IN input on
this receiver.
Use an HDMI cable for the connection. If an
HDMI output is not on your DVD player, use a
digital audio cable to connect the coaxial or
optional output and this unit.
2 Connect the HDMI OUT on this receiver to
an HDMI input on your TV.
Use an HDMI cable for the connection.
Note
1 In this case, you'll need to tell the receiver which digital input you connected the player to (see Choosing the input signal on
page 29).
2 When you use an HDMI cable for connection in steps 1 and 2, you can enjoy the home theater in multichannel playback without
following steps 3 and 4.
3 This connection will allow you to make analog recordings from your BD/DVD player.
This receiver
HDMI HDMI
BD/DVD
IN
COAXIAL COAXIAL
TV/SAT
IN
IN IN
(CD) (CD)
OPTICAL
IN
(DVR/VCR)
OUT OUT
IN IN
(CD-R/TAPE) (CD-R/TAPE)
DIGITAL
2
HDMI IN
4
OPTICAL
DIGITAL
AUDIO OUT
1
2
AUDIO
IN IN
OUT CD-R/TAPE CD
L
R
IR OUT DVR/VCR IN TV/SAT IN TV/SAT IN
L L
IN
ASSIGNABLE
1 1
R R
SURROUND CENTER FRONT
2
L L
1 1
R R
BD/DVD IN BD/DVD IN
ASSIGNABLE SUBWOOFER
1 - 2 BD/DVD MULTI CH IN
1
COAXIAL
DIGITAL
AUDIO OUT
1
HDMI OUT
BD/DVD player
3 Connect the stereo analog audio outputs
on your BD/DVD player to the BD/DVD inputs
on this receiver.
Use a stereo RCA phono cable for the
connection.
• If your BD/DVD player has multichannel
analog outputs, see Connecting the
multichannel analog outputs on page 10 for
how to connect it.
AUDIO
ZONE2 OUT
R L
ANTENNA
FM
UNBAL
75 Ω
AM
LOOP
3
R L
ANALOG AUDIO OUT
3
03
9
En