Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Other connections
Chapter 7
Other connections
Connecting auxiliary
components
Using the stereo analog inputs, you can
connect an external component such as a
VCR, MD or CD player for playback through
this system.
Tape deck, etc.
AUDIO
OUTPUT
L
VIDEO
R
OUT
VIDEO
•
Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the AV CONNECTOR output.
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1
Press SOUND MODE .
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• The Recording mode switches off if you change the input function (DVD (CD), TUNER, etc.) or switch the power off.
All manuals and user guides at all-guides.com
LINE 2
R
FRONT
IN
OUT
L
R
R
SURROUND
AUDIO
WIRELESS
S
1
Dolby
2
Use
(cursor left/right) to select REC
MODE then press ENTER .
3
Use
(cursor up/down) to select
MODE ON or MODE OFF then press ENTER to
confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer). You won't
hear anything through the wireless speaker.
• MODE OFF – For regular multichannel
playback through your speaker system.
Nothing is output from the AV
CONNECTOR terminal.
Connecting external antennas
For an external AM antenna, use 5–6 meters of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Outdoor antenna
Indoor
antenna
(vinyl-coated
wire)
5–6 m
07
AM
LOOP ANTENNA
27
En
Publicité
Table des Matières
