Remote Control; User Menu; Adjusting Fans - ZANTIA CINEA CANALIZÁVEL Manuel D'utilisation Et D'entretien

Instructions for use
4.2.2

REMOTE CONTROL

The product is mainly commanded from the control panel at
the top. It is however possible to purchase the remote control
as an accessory to perform the following functions:
Ref.
Switch the stove on and off:
1
Point the remote control and simultaneously press the top keys
marked "+".
Change power of the fi e:
2
Press the "+" and "-" keys marked with the fire symbol.
Adjust room temperature:
3
Press the "+" and "-" keys marked with the thermometer symbol.
3
The remote control is the infrared type and therefore the sig-
nal cannot bypass walls or other solid objects but it can ex-
ploit the reflection of waves on walls in the room.
Replacing batteries
The batteries are housed at the bottom of the remote control.
To replace them, remove the battery holder, remove or insert
the battery by following the symbol on the remote control
and on the battery itself.

A235 12V batteries not included.
The batteries used contain metals harmful for
the environment and must therefore be dis-
posed of separately in specific ontainers.
If the remote control is off because the bat-
tery is missing, the product can be command-
ed from the control panel at the top. When re-
placing batteries, pay attention to the polarity
by following the symbol on the internal com-
partment of the remote control.
rev 00
Mod. CINEA CANALIZÁVEL
Description
translated from the original text
4.3

USER MENU

The following is a synthetic description of the structure of the
user manual. The various items can be accessed by scrolling
the keys (5-6) tab. 5. To enter the menu, press the key (3) tab.
5.
01 - Adjust fans
02 - Set clock
01 - day (day of the week)
02 - hours (time of the day)
03 - minutes
04 - day (day of the month)
05 - month
06 - year
03 - Set chrono
1
01 - enable chrono
02 - program day
03 - program week
2
04 - program weekend
04 - Choose language
01 - Italian
02 - French
03 - English
04 - German
05- Standby mode (on/off )
06 - Buzzer (on/off )
07 - Initial load (on/off )
08 - Stove status
4.4

ADJUSTING FANS

This allows you to adjust the two supplementary fans inde-
pendently. The selections in tab.6 below can be made for each
of the two fans. From the 01 - Adjust fans menu, accessed
01 - enable chrono (on/off )
01 - day chrono (on/off )
02 - start 1 day (time)
03 - stop 1 day (time)
04 - start 2 day (time)
05 - stop 2 day (time)
01 - week chrono (on/off )
02 - start prog 1 (time)
03 - stop prog 1 (time)
04 - Monday prog 1 (on/off )
- - -
10 - Sunday prog 1 (on/off )
- - - continue with prog 2 and prog 3
01 - weekend chrono
02 - start 1
03 - stop 1
04 - start 2
05 - stop 2
EN
17