Display And Control Elements; Rotary Push Button; Back Button - Truma CP Plus Mode D'emploi

Display and control elements

6
7
9
1 = Display
2 = Status bar
3 = Menu bar (upper)
4 = Menu bar (lower)
5 = 230 V mains supply indicator (power)
6 = Time switch display
7 = Settings / Values

8 = Rotary push button

9 = Back button

The menus can be selected in lines (3 + 4) and settings can be
made using the rotary push button (8). The display (1) has an
illuminated background. The Back button (9) can be used to
go back to a previous menu.
Rotary push button
Setpoints and parameters can be selected and modified using
the rotary push button (8) and saved by tapping on it. Select-
ed menu items flash.
1
+
Rotate clockwise
2
3
-
5
Rotate anticlockwise
4
8
Tap
Long press
Back button
Press the Back button (9) to return to a previous menu and
cancel changes. This means that the previous values are
retained.
– Menu is run through from left to right.
– Increase values (+).
– Menu is run through from right to left.
– Decrease values (-).
– Accept (save) a selected value.
– Select a menu item, switch to setting
level.
– Main switch function ON / OFF.
– If a Truma iNet Box was recognised
while searching for an appliance, the
function of the rotary push button
changes (see "APP mode in conjunc-
tion with an iNet Box" on page 25).
EN 23