Lutron GRAFIK Eye. NTGRX-4S Instructions D'installation page 5

Note: All IR receivers in the same room must be configured with the same scene setting. Therefore, all IR Wallstations must be set to include
scenes 1—4 if installed in the same room with a GRAFIK Eye Control Unit. (GRAFIK Eye Control Unit scene buttons are always scenes
1—4.)
Wallstation
NTGRX-4S, NTGRX-4S-IR, Select Scenes 1—4
NTGRX-4B
LUTRON LUTRON LUTRON
NTGRX-4PS Not Applicable
1
2
3
4
PARTITION STATUS
OPEN
CLOSED
NTGRX-4M Fifth button turns Control Units
On only
LUTRON
Select Scenes 1—4
GRX-4S-DW
LUTRON
Select Scenes 1—4
EGRX-4S,
EGRX-4S-IR
EGRX-8S, Select Scenes 1—8
EGRX-8S-IR
5 6 7
Wallstation
NTGRX-2B-SL Select Scenes
1 and Off
Select Scenes
EGRX-2B-SL
1 and Off
Occupant Copy
5 6
Factory Set
Select Scenes 5—8
Not Applicable
Not Applicable
Select Scenes 5—8
Select Scenes 5—8
Select Scenes 5—12
5 6 7 5 6 7
Select Scenes Select Scenes
9 and 10 13 and 14
Select Scenes Select Scenes
9 and 10 13 and 14
5 6 5 6
Select Scenes 9—12
Not Applicable
Not Applicable
Select Scenes 9—12
Select Scenes 9—12
Select Scenes 9—16
5 6 7 5 6 7 5 6 7
Panic Control Fine Tuning Partition Status
Control Control
Panic Control Fine Tuning Partition Status
Control Control
5
5 6
Select Scenes 13—16
Not Applicable
Fifth button turns Control Units
Off only
Select Scenes 13—16
Select Scenes 13—16
Select Scenes 13—4
5 6 7 5 6 7
Zone Lockout Sequence Scenes
5—16
Zone Lockout Sequence Scenes
5—16
Installation Instructions